Max. Workpiece SizeL x W x H (mm) | 1190 x 720 x 295 |
---|---|
Max. Workpiece Weight (Kg) | 750 |
X/Y Stroke (mm) | 750 x 500 |
U/V Stroke (mm) | 100 x 100 |
Z Stroke (mm) | 300 |
Max. Cutting Taper (H=100) | ±21° |
Wire Spool Weight (Kg) | 10 |
Footprint (mm)W x D x H | 3000 x 3200 x 2250 |
Water System Capacity (L) | 1060 |
Machine Weight (Kg) | 4300 |
(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.
Controller Specifications
Blacklash compensation | WINDOWS CE |
---|---|
Control Device | 64-bit Industrial PC |
Memory Device | 1GB CF Card |
Screen Display Device | 17” Color TFT Touch Screen |
Data Input | Keyboard, RS-232, USB, Ethernet, FTP |
Simultaneous Axes | 4 Axes / 5 Axes (Option on W Axis) |
No. of Control Axes | 5 Axes / 6 Axes (Option on W Axis) |
Min. Command Unit | 0.0001mm |
Max. Command Range | ±9999.9999 mm |
Command Type | mm / inch |
Cutting Data Memory | 99999 sets |
Ignition Power Supply | 32 Steps,53V~138V |
On time | 24 Steps |
Off time | 43 Stpes |
Discharge Mode | Rough Cut / Skim Cut / Fine Cut |
Backlash compensation | Constant / Servo feed | Different shape interpolation | Auto position (edge, center) |
Linear / Circular interpolation | Auto power recovery | Background edit | Soft limit |
Cutting path display | Trace to break point | Star point return | Corner control function |
Retrace to start point | Reference point return | Break point return | Diagnosis |
Reference point setting | Taper cutting | Auto corner | Z axis software limit |
Multi-blocks skip | Maintenance memo | Program edit / copy / delete | Manual data input |
Cutting log | Axis exchange | Rotation | Auto / Manual feed |
Mirror | Dry run | Single block | Short back |
Optional stop | Block stop | Sub program | Wire consumption offset |
Pitch compensation | Parallel compensation | 2nd. Soft limit | Anti-Collision |
Upper / Lower Flushing Nozzle | Diamond Guide | Conductor Plate |
Diamond Guide Remove Jig | Brass Wire | Tool Box |
Waste Wire Bin | Ion Resin Tank | Ion Exchange Resin |
Paper Filter | Vertical Alignment Jig | Water Chiller |
SD Master | Auto Wire Threading (AWT) |
Spray mist Lubricator | Pilot Lamp | Remote Master |
Safety Door Interlock | PCD / Graphite Cutting | 0.1mm Wire Application |
Transformer | 45Kg Wire Jumbo Feeder | Auto Voltage Stabilizer |
X/Y Linear Scale | 6th Axis Package (W axis) | Alarm Messenger |
MST (AL-400SA/500SA/560SA/600SA) |
High Pressure Water Jet Threading (Not Available with Anti-Collision on Z Axis) |